Caring for Your Custom Cabinets in Green Bay

Each tree is a product of nature. As such, there will be varying color and grain patterns. We make every effort to blend varying colors, grains, and textures of wood during the finishing process. These varying colors, grains and textures in wood are not defects but nature’s trademark. 


Showcase Kitchens in Green Bay, WI delivers a finish that brings out the full depth and beauty of natural woods. Proper care and maintenance will give you years of service and pride of ownership.

Helpful Hints

  1. Soon after installation, wipe the cabinets with a damp, soft cloth. Always, after cleaning your cabinets, wipe them with a dry, soft cloth to eliminate moisture. Do not use a wax that contains a cleaner. Also, we do not recommend a spray wax. 
  2. Regular cleaning requires using a damp, soft cloth, then drying. Do not use harsh or strong detergents, abrasive cleaners or anything that contains silicone. These have harmful, deteriorating effects on any finish. We recommend you clean your cabinets approximately twice a year.
  3. There are areas within the kitchen that are susceptible to moisture (sink, range, oven, dishwasher areas). We recommend that you dry off moisture when it collects.

Warranty

Showcase cabinetry is manufactured by skilled craftsmen to meet rigid requirements and specifications. Showcase warranties its products to the original purchasers to be free from defects in workmanship and material for one year. This limited warranty does not cover misuse, abuse or neglect. 


The doors, as with any solid wood product, may expand and contract due to humidity. Please allow six to nine months for this process. If the problem is not corrected, or if you have any other problems, please call Showcase Kitchens at (920) 465-8800 , and ask for our service department.

Use & Care Guide

Basics to Adjusting a Fully Concealed Hinge

This hinge is adjustable in three directions. Start with patience and a Phillips screwdriver.

Height Adjustment — Green Bay, WI — Showcase Kitchens

Use these two screws to adjust the height of the doors and/or align the tops of the doors.

Height Adjustment

This adjustment involves two screws, one to the top and one to the bottom of the clip. Loosen the screws slightly, and then lift or lower the door until it is in the position you want. Retighten the screws to secure the door.

Depth Adjustment — Green Bay, WI — Showcase Kitchens

Use this screw to bring the door into alignment with neighboring cabinet doors/drawers.

Depth Adjustment

Use this screw to adjust how far out or in the doors are in comparison to your cabinet and to the other cabinet doors and drawers surrounding it. Loosen the screw, and manually push or pull the door to adjust it. Retighten the screw when the door is in the position you want.

Side to Side Adjustment — Green Bay, WI — Showcase Kitchens

Use this screw to adjust the gap between doors, walls and other cabinets for parallel alignment.

Side-to-Side Adjustment

Using a Phillips-head screwdriver, turn the adjustment screw clockwise and counterclockwise to move the door – the direction of turn and its effect is dependent on which side of the door the hinge is attached.

On a door with a RIGHT-SIDE HINGE

  • Turn the screw CLOCKWISE to move the door to the RIGHT
  • Turn the screw COUNTERCLOCKWISE to move the door to the LEFT

On a door with a LEFT-SIDE HINGE:

  • Turn the screw CLOCKWISE to move the door to the LEFT
  • Turn the screw COUNTERCLOCKWISE to move the door to the RIGHT

Showcase Kitchens in Green Bay, WI shows you the proper way to care for your new cabinets, countertops, and hardware. Call (920) 465-8800.

Share by: